The electrolyte of a gel battery is a gel electrolyte

by:Power Kingdom     2021-07-13

Batteries are mainly used for UPS power system software, medical equipment, communication equipment, diesel engine equipment, solar system software, system software, automatic control systems, mobile communication stations, pipeline cathodic protection equipment, wind power equipment and power engineering drive system software.

Characteristics of the battery: Completely sealed, no maintenance design. The design life (25c) is 6v, 12v to 12 years, and 2v is close to 18 years. According to the requirements of high frequency, deep charge and discharge, the discharge capacity and the capacity of the deep cycle system are greatly improved. It is made of broken bubble board (there are different FTF boards). Analysis of pure lithium battery electrolyte. No leakage. Valve control, the maximum opening working pressure is 2psi (1psi7kpa). Random orientation.

The silica gel composed of fumed silica and various preservatives can absorb the hydrochloric acid in the suspicious rubber. In addition, the pore-like pores in the suspicious rubber create a safe passage for the positive dissolved oxygen to enter the negative stage. For the purpose of high sealing efficiency, the rechargeable battery is sealed, lithium-free battery electrolyte overflow and organic gas can be dissolved, and there is no pollution to the natural environment and mechanical equipment.

The electrolyte solution of the gel battery is in a suspicious rubber state, without fluidity and leakage, and can be placed in a columnar or vertical state.

Grid structure: fungus displacement design, 2V series products have a plastic film at the bottom, which can improve the reliability of the battery. The aluminum alloy uses lead calcium tin aluminum alloy, and the negative plate has a high potential for hydrogen evolution. The positive plate aluminum alloy is a high tin and low calcium aluminum alloy with high crystal density and good corrosion resistance.

Using rubber batteries as the corrugated plate, the aperture ratio is large and the resistance is small.

The battery cover is made of ABS material and is sealed with epoxy resin sealant to ensure no leakage.

Pure lead material is used, which has good corrosion resistance. A pressure ring and a sealing ring are used to form the pressure ring and the rechargeable battery cover.

The rechargeable batteries of 2v and 12v series products have gas filter explosion-proof chip equipment, and there is no ignition outside the rechargeable battery, and will dissolve the troubles of the steam body, making it non-polluting to the natural environment.

The electrolyte of the gel battery is a gel electrolyte, and there is no acid level, so the film can reflect the uniformity in any place, thereby improving the reliability of large and medium-sized batteries.

Too much electrolyte solution as a sol condition can fill the entire battery space. Rechargeable batteries are not easy to dry under high temperature charging conditions, and have high thermal conductivity and heat dissipation.

The gel electrolyte solution of the colloidal battery is harmful to the whole process of the formation of positive and negative active chemical substance crystals, so that the deep charge-discharge cycle system of the rechargeable battery works well, and the resistance to potassium sulfate is improved.

The temperature range of rechargeable batteries is wide (-30c50c), and the service life of lithium batteries is low.

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...