loading

New car battery charging method-Power Kingdom

by:Power Kingdom     2020-08-19
Will be the positive, the positive power batteries battery anode to connect power cathode. Initial charge for two stages: first with the initial charging current into the electrolyte to emit bubbles, the single voltage rises to 2. 3 to 2. 4 v. Then reduced to 1/2 at the beginning of charging current, continue to electrolyte filling out severe bubbles, than continuous 3 h) and voltage stable. All the charging time is about 45 ~ 65 h. Should be used in the process of charging the electrolyte temperature measured in current by half, stop charging or cooling method, the temperature control in 35 ~ 40 ℃, when the initial charge, if the proportion of the electrolyte illegal, application of distilled water or proportion of 1. 4 the electrolyte to adjust. Adjust the recharging after 2 h, until density conform to the rules. New battery charge for the first time after the often short of capacity, should carry on the discharge cycle. When using a 20 hh discharge rate discharge ( With 1/20 of the rated capacity current discharge to the single voltage drop to 1. 75 v) , and then to supplement the charging current is enough, after a charge and discharge cycle if the capacity is less than 90% of the rated capacity, should be for an additional charge and discharge cycle.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...