How to maintain and use car batteries safely

　　 If the car does not start for 5 seconds, please stop it immediately and wait for 10 seconds to start again.

　　 When the engine is not running, please do not use car electrical appliances (audio, lighting, etc.). ).

　　 Before leaving the car, turn off the electrical appliances, and finally turn off the engine.

　　 If the vehicle is not used for a long time (such as more than 2 weeks), it is recommended to disconnect the negative connection to reduce the power loss of the battery.

　　 Note: Vehicles with trip computers cannot perform this operation to avoid loss of information.

　　 Regularly go to the 4S shop or professional car repair station for testing.

　　 The vehicle is more difficult to start. It requires more than one fire fighting, and it feels that the starting power is insufficient.

　　 When the engine is not running, sound the horn several times. If the sound is obviously weak, it means that the power is not stored and needs to be replaced;

　　 When the engine is not running, turn on the backup power supply for 5 minutes. If the engine is visibly dimmed, it means that the power source is not stored and needs to be replaced.

　　Please check it at the battery business office.

　　 Under normal circumstances, the service life of the battery is 2-3 years. It is recommended to replace it during this period to ensure your safe driving.

　　 In order to ensure the safety of the battery and achieve the longest service life, the average annual storage temperature should be 15℃, and the short-term storage temperature should not exceed 25℃, otherwise it will affect the battery’s life.

　　Of course, batteries should be sold on a first-in-first-out basis. In order to facilitate access to battery life, all battery products have a date laser code printed on the middle cover of the battery: For more details, please refer to the attached accessories.

　　Please read Chapter 1 of Safe Operation

　　How to remove the battery from the CA

< /p>

　　 Store the battery in a cool and dry environment.

　　 Make sure the battery is fully charged, and charge it every two months.

　　 Any cleaning work that corrodes the terminal may affect the performance of the battery and may be a safety hazard. Brush the terminals and connection clips with a diluted solution of sodium bicarbonate to remove corrosion. Brush with anti-oxidant grease, then reconnect and lock the clamp.