Which distilled water to add to the battery
Daily inspection and maintenance of the battery Before disconnecting the battery from the charger, first check the display of the charger and the record of the charger. If there is an error message displayed on the charger panel, the charging of the battery is generally not completed. When a fault occurs, the charger has interrupted the charging process. At this time, you need to contact Linde's after-sales service personnel. After checking that the charging condition is normal, record the charging time of the charger, the output capacity and the average voltage of the cell at the end of charging, and then disconnect the battery from the charger.
Clean the dust on the surface of the battery to avoid the formation of a discharge loop on the surface of the battery and shorten the discharge time of the battery. But please be careful not to rinse with water, just wipe it with a clean cloth. Check the connection between the battery cells and the connection of the battery's power output line to ensure that the battery is well connected to ensure that the current output is unblocked. Before connecting the plug of the battery to the power socket of the forklift electrical appliance, check whether the electrolyte level of each battery cell is within the standard range. If the electrolyte level is low, add distilled water to the standard range. (Generally, it is required that the liquid level of the electrolyte cover the electrode plate by 10-15mm. If possible, the automatic water filling system of the battery can be used to ensure that the water is added at the correct level each time).
After filling the liquid, connect the battery to the power socket of the forklift. Note: The liquid level of the battery is too high or the addition of distilled water before charging will cause the electrolyte to overflow. Note: The liquid level of the battery is too high or the addition of distilled water before charging will cause the electrolyte to overflow, and the electrolyte level of the battery will be too low. Damage the electrode plate of the battery. If the liquid level is too low, the electrode plates of the battery will be damaged. Which type of distilled water to add to the battery: When adding distilled water to the battery, you should pay attention to the reliable quality of distilled water. Normal tap water, mineral water and general drinking water contain impurities and metal elements, which will produce precipitates and cause short circuits to affect battery life. Generally, when distilled water for industrial use is not available, higher quality (such as super-full distilled water) household distilled water can be used.
