Shenzhen Power Kingdom remind you note: lead-acid battery - the use of the environment
by：Power Kingdom 2020-08-17
Lead-acid battery using the environment: 1, to avoid the battery, direct contact with metal containers should use anti acid and heat resistance materials, otherwise it will cause smoke or burning. 2, use the designated charger under specified conditions, otherwise it may cause the battery overheat, deflated, leak, burning or rupture. 3, do not install the batteries in the sealing device, otherwise it may break the equipment pu. 4, the battery used in medical equipment, please install the power outside of the backup power supply, or mains failure will cause damage. 5, put away from the battery can produce spark equipment, sparks or smoking may cause the battery or broken. 6, don't put battery in the heat source (near Such as transformer) , otherwise it will cause the battery overheat, leakage, burning or broken. 7, the application of cell number in more than one, please ensure that the connection between the battery and correct, and connected to the charger or load is correct, otherwise it will cause damage to the battery rupture, burning, or, in some cases also hurts. 8, pay special attention to don't let the battery on your feet. 9, battery using range specified as follows. Beyond this range is likely to cause damage to the battery. The scope of the normal operation of battery: 77. F ( 25℃） After the battery discharge ( In a device) : 5. F - 122. F( - 15 ℃ to 50 ℃) After the charge: 32. F - 104. F( 0 ℃ to 40 ℃) Storage: 5. F - 104. F ( - 15 ℃ to 40 ℃) 10, not to be mounted on the locomotive battery in high temperature and direct sunlight, fire or fire, otherwise it may cause battery leakage, fire or rupture. 11, don't use batteries in place full of dust, may cause the battery to short circuit. When using the battery in the dusty environment, should be regularly check the battery.