Charging method of gel battery

Label: The charging method of the colloidal battery The charging method of the colloidal battery depends on the state of use of the battery. There are usually two states, namely cycle use and floating charge use (mostly used for UPS). This type of battery must use the correct charging method, otherwise the battery The life span is very serious and even scrapped. So how can I choose the normal charging method to use gel batteries? Recycling: 6V gel battery charging voltage is 7.25-7.45V, charging current (A) ≤ 0.30, the best 0.10 12V gel battery charging voltage is 14.5-14.9V, charging current (A) ≤0.30, best 0.10 Floating use: 6V gel battery charging voltage is 6.8-6.9V, charging current (A) ≤0.30, best 0.10 12V gel battery charging voltage is 13.6-13.8V, charging current (A )≤0.30, best 0.10 The charging voltage mentioned above refers to the environment temperature of 25℃. When the environment temperature changes greatly, the charging voltage should be adjusted accordingly. When the ambient temperature increases by 1℃, the charging voltage decreases by 0.003V/cell; when the ambient temperature decreases by 1℃, the charging voltage increases by 0.003V/cell; if the temperature changes by more than 10℃ without correcting the float voltage, it may be The gel battery is damaged. The working environment temperature of the battery should be controlled within the range of 20-25℃ (it is recommended to install in an air-conditioned room).