- General Purpose Battery
- Front Terminal Battery
- KT Series Special battery for coal mine
- Deep Cycle Battery
- High Rate Battery
- AGM Gel Battery
- Uninterruptible Power Supply (UPS)
How about the anti-corrosion work of the battery?
Anti-corrosion work is also one of the names that should be paid attention to in battery protection work. In order to ensure the normal operation of the battery pack and prevent sulfuric acid vapor and sulfuric acid droplets from falling into the buildings or equipment in the seedling battery room, this must be done. The wires and connecting wires of the battery should be painted with acid-resistant paint of different colors according to their polarity.
The positive pole should be red, the negative pole should be painted blue, the connecting wire and tap should be treated with two stone forest ointment at both ends, and re-coated as soon as possible.
Doors, window frames, walls, ceilings, ventilation hoods, ventilation ducts, metal structures, brackets and lighting should be painted with acid-resistant paint. If there is no anti-acid roller, useful reasons and paint or lacquer. In order to maintain durability, a layer of acid-resistant varnish should be added after painting to prevent corrosion.
How strong is the battery charge? Under the premise of charging voltage and current, adjust the number of batteries used in Shaoguan units. This is very important for electric bicycles. If the charging ability is poor, it will take 8 to 10 hours, or even more than 14 discharges and charges. Contact: 18038382979